– This PCIe 1 to 4 Riser Card can be plugged directly to the motherboard without any extender cable. It can also be fixed to the case. (compatible with X4, X8, X16 slot).

– This PCI-Express card reduces the number of adapter and transfer line to effectively reduce the interference and signal loss, and ensure data reliability, so as to improve work efficiency!

– The main control panel of this PCI expansion card uses PCI-E interface direct power supply mode, and no external power line is needed, so that the main board power is free from external interference, thus becomes more stable.

– PCI-E 1 to 4 Riser Card, Supported OS: HiveOS, DOS, Linux, Windows XP/7/8/10, Server 2003-2008 32/64-bit.( no need to install driver).

Great Extendability

*Plugs directly to the board without any extender cable, can be fixed to the case.

*PCI-E slot power solution, no extra power cable needed.

*Only one cable to the slot, easy and convenient to settle and install.

*With IC heat radiator.

PCI Express 2.0, X1 Interface.

*PCI Express 2.0 standard with PCIE X1 interface will compatible with PCIE 3.0/4.0/2.0/1.1 standard.

*Compatible with PCIE X1,X2,X4,X8,X16 slot.

Specification

Bus Interface: PCI-E X1 (compatible with X4, X8, X16 slot)

Interface type: PCIE to 4-port USB 3.0

Product size: 120mm (bracket length) *67mm*57mm

Support system: DOS, Linux, Windows XP/7/8/10

– This motherboard power reset switch button kit with 1.6m extension cable fits most desktop computer host cases and mining cases with front panel button.

– With the 1.6m extension cable, you can put the round power button kit on your desk, making it easier to power on your PC if it’s not located in an easy-to-reach place .

– The power switch kit comes with two buttons (Power & Reset) and three LEDs (Power, Hard Drive Activity &  Sleep). With this power switch connected, there’s no need to go fumbling under desk to turn on PC anymore.

– Each switch and LED is clearly labeled to make installation easy. Please check your motherboard’s website for a manual on where to connect it, or simply remove the front panel connectors one by one, replacing them with those provided by this switch.

– There is a metal sleeve over the cable that sits nicely in the card-slot cover to prevent the cable from being accidentally pulled or disconnected from the main board.=

Convenient Alternative Power Switch Kit for your PC

This convenient computer power button makes power Computer much easier. Located computer in a hard to reach area , this is a convenient switch on the desk and hitting it rather than bend down to turn the computer on

There are three LED lights (Power, Hard Drive Activity & Sleep) in the switch. They’re solid blue when the computer is on, and  flicker with red light when your computer is loading or doing something memory intensive. The intensity of red light can even correspond with how much strain your computer is under, so it’s easy to tell if your computer is off or just sleeping when you return.

Details:

Cable Length : 1.6m
Material (External) : Plastic, Metal
Package: 1 Set of Desktop Power Switch Button Kit

• You could add four 6Gbps/s SATA 3.0 devices to your computer with this PCI-E SATA expansion Backward compatible to 1.5 Gbps/s and 3 Gbps/s
• This4 port SATA controller PCI-E expression card based on ASM1064 chip is more stable and wider compatible. Port Multiplier FIS-based and Command-based switching are supported.
• The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. It also supportsinstalling Windows OS from Win10 PE.
• This4 port PCI-E to SATA 0 expansion card comes with a low profile bracket, compatible with most chassis on the market. Fit for PCI-E X2/X4/X8/X16 slot.
• It’s possible to boot the system from thisSATA expression card without RAID, but if your motherboard supports RAID function, you could make a RAID with this PCI-E SATA expansion card.

This PCI-E X1 to 4 SATA 3.0 ports controller expansion card offers a simple connection between a host computer and SATA 3.0 devices (SATA hard drive or SATA device), which allows 4 SATA devices to be connected to the motherboard at the speed up to 6Gbps.

Features

– Chipset: ASM1064

– Support 4 SATA 3.0 6Gbps devices

– Compliant with PCI-Express Specification v2.0 ,v3.0, backwards compatible with PCI-E 1.0

– Compliant with Serial ATA Specification 3.0, backwards compatible with Serial ATA 2.0, Serial ATA 1.0

– Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps

– Supports Port Multiplier FIS-based and Command-based switching

– Plug and play, supports Hot Plug and Hot Swap

– Applicable Slots: PCI-Express X1, fit for PCI-E X2/X4/X8/X16 slot.

– Support for Windows XP / 7 / 8 / 10 / VISTA / MAC / NAS / Linux OS.

• The VER 009C-Plusriser kit is the newest and top of the line solution for setting up GPU mining rigs.
• This New Version PCI-E 1x to 16x powered riser adapter cardhas 8 solid capacitors on it to ensure that the delivery of power to the graphics card is stable and safe.
• The 60cm USB 3.0 extension cableis soft and long enough to help you neatly arrange your graphics cards in your PC case.
• ThePCI-E 1x to 16x powered riser adapter card kit adopts multi-layer shielded wires preventing the signal from weakening within a 3-meter extension limit.
• The New Version PCI-E 1x to 16x powered riser adapter cardhas a large 4 Pin interface and two 6 pin interfaces. So you can provide your graphics card with independent power and reduce the burden on the motherboard when using more graphics

This VER 009C-Plus riser extension cable kit for graphics card is the newest and top of the line solution for setting up GPU mining rigs. It’s suitable for motherboards with PCI-E 1X 2X 4X 8X 16X. With this new version riser extension cable kit, you can freely arrange your graphics cards in your mining rig without worrying the safety and quality of power delivery.

This VER 009C-Plus riser extension cable kit for graphics card incudes

1 * PCI-E 16x Main Card

1 * PCI-E 1x Card

1* 6-Pin Power Cable 

1* 60cm USB 3.0 extension cable