• This SATA splitter cable is designed to connect motherboards to 5 pieces of Serial SATA hard drives, HDD, SSD and DVD drives, quickly upgrading your computer for expanded storage through 5 females straight SATA
• This SATA power splitter adapter cable is fully compatible with 2.5″ SSD, 3.5″ HDD, CD Drives, optical DVD Drives, Bluray Drives, PCIe express cards,etc.
• The cableis constructed with pure copper conductors and fire-proof plastic jacket to ensure strong toughness and wear resistance. It’s standard 18 AWG, providing reliable performance on supporting 5 SATA storage devices with sufficient power supply.
• Thelocking latch design on each female end of the cable ensures secure connections for fast and reliable power supply.

This SATA Power Splitter Cable is an essential component for building, upgrading or repairing computers. It provides sufficient length, so multiple drives can be easily connected in parallel to one power cable. You can neatly power up to 5 pieces of Serial SATA hard drives, HDD, SSD and DVD drives, quickly upgrading your computer for expanded storage through this SATA Power Splitter Adapter Cable!

SATA Cable Specifications
Side 1: SATA 15-Pin Male Plug
Side 2: 5 x SATA 15-Pin Female Plug with locking latch design
Cable Length: 9.5in + 5.3in + 5.3in + 5.3in +5.3in

This cable is used to extend the SATA power supply.
Supports 5V / 2A and 12V / 2A
Hot swap is not supported (when replacing the power cord, the power must be off).

• This handy Molex to Dual SATA power adapter cable powers two SATA drives from a single LP4 connection; .
• It’s an ideal solution for the DIY computer builder or IT tech repair when installing new or replacement SATA drives or DVD drives to a power supply that only has Molex power ports;
• The Molex to SATA power cable provides a spare for upgrades or repairs with a 9inch cable length that is perfect for internal cable management.
• This heavy duty splitter with a Molex 4-pin male to 2 SATA 15-pin female straight connectors is constructed with flexible 18 AWG conductors for reliable performance when connecting two SATA HDDs to a power supply.

This LP4 to SATA Power Y-Cable Adapter features two Serial ATA power (female) connectors and one LP4 male connection.

It’s a reliable solution that lets you power two SATA drives using a single LP4 connection to the computer power supply. 

It’s a handy addition to your toolbox when building, upgrading or repairing computers. It connects newer SATA internal hard drives, optical drives, and motherboards to a power supply with legacy LP4, 4-pin Molex connectors. Recycle older power supplies for repairs or replacements. Utilize the extra Molex ports on a power supply when the SATA ports are all occupied.

* Supports 5V SATA drives (not 3.3V) and 12V ATX power supplies.

* Sample compatibility list includes Anker Uspeed USB 3.0 PCI-Express Card, Antec VP-450W Power Supply, 24x DVD-RS serial-ATA internal optical drive, DVD SATA Supermulti Burner, Coolmax 500W Power Supply, Cooler Master Elite 460W Power Supply, Crucial 256GB SATA 2.5″ Internal SSD, EVGA 430W Power Supply, Intel 520 Series 120GB SATA 2.5″ SSD, HDE SATA to IDE/IDE Drive Interface, Kingston Digital 120GB 2.5″ SSD.

• This SATA splitter cable is designed to connect motherboards to 5 pieces of Serial SATA hard drives, HDD, SSD and DVD drives, quickly upgrading your computer for expanded storage through 5 females straight SATA
• This SATA power splitter adapter cable is fully compatible with 2.5″ SSD, 3.5″ HDD, CD Drives, optical DVD Drives, Bluray Drives, PCIe express cards,etc.
• The cableis constructed with pure copper conductors and fire-proof plastic jacket to ensure strong toughness and wear resistance. It’s standard 18 AWG, providing reliable performance on supporting 5 SATA storage devices with sufficient power supply.
• Thelocking latch design on each female end of the cable ensures secure connections for fast and reliable power supply.

This SATA Power Splitter Cable is an essential component for building, upgrading or repairing computers. It provides sufficient length, so multiple drives can be easily connected in parallel to one power cable. You can neatly power up to 5 pieces of Serial SATA hard drives, HDD, SSD and DVD drives, quickly upgrading your computer for expanded storage through this SATA Power Splitter Adapter Cable!

SATA Cable Specifications
Side 1: Large 4 Pin (LP4) molex connection 

Side 2: 5 x SATA 15-Pin Female Plug with locking latch design
Cable Length: 9.5in + 5.3in + 5.3in + 5.3in +5.3in

This cable is used to extend the SATA power supply.
Supports 5V / 2A and 12V / 2A
Hot swap is not supported (when replacing the power cord, the power must be off).

• This SATA IIIdata cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage.
• The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. Data transfer speed is limited by rating of the attached equipment.
• Constructed with pure copper conductorsand low-profile plastic jacket, this SATA III cable has strong toughness and wear resistance. The locking latch design on each end of the cable can ensure secure connection.
• This straight SATA data cable isflexible enough to allow an efficient and organized installation in tight computer cases. It’s also a cost effective way to provide replacement or spare for different SATA systems or for RAID configuration.
• Plug in and Play!No software installation required. But please noted that this data cable does not provide power for your hard drive. It must be powered separately.

This SATA III 6 Gbps data cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers, quickly upgrading your computer for expanded storage. 

It’s compatible with

– 2.5″ SSD drive

– 3.5″ HDD drive

– Optical DVD drive

– RAID controller host card

• This 90 degreeright angle SATA III data cable is specially designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage.
• The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. Data transfer speed is limited by rating of the attached equipment.
• Constructed with pure copper conductorsand low-profile plastic jacket, this SATA III cable has strong toughness and wear resistance. The locking latch design on each end of the cable can ensure secure connection.
• Designed with a right angle connector, this SATA datacable is an indispensable tool for securing difficult to reach connections in small cases. It is also a cost effective way to provide replacement or spare for different SATA systems or for RAID configuration.
• Plug in and Play!No software installation required. But please noted that this data cable does not provide power for your hard drive. It must be powered separately.

This SATA III 6 Gbps data cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers, quickly upgrading your computer for expanded storage. 

It’s compatible with

– 2.5″ SSD drive

– 3.5″ HDD drive

– Optical DVD drive

– RAID controller host card

– This PCIe 1 to 4 Riser Card can be plugged directly to the motherboard without any extender cable. It can also be fixed to the case. (compatible with X4, X8, X16 slot).

– This PCI-Express card reduces the number of adapter and transfer line to effectively reduce the interference and signal loss, and ensure data reliability, so as to improve work efficiency!

– The main control panel of this PCI expansion card uses PCI-E interface direct power supply mode, and no external power line is needed, so that the main board power is free from external interference, thus becomes more stable.

– PCI-E 1 to 4 Riser Card, Supported OS: HiveOS, DOS, Linux, Windows XP/7/8/10, Server 2003-2008 32/64-bit.( no need to install driver).

Great Extendability

*Plugs directly to the board without any extender cable, can be fixed to the case.

*PCI-E slot power solution, no extra power cable needed.

*Only one cable to the slot, easy and convenient to settle and install.

*With IC heat radiator.

PCI Express 2.0, X1 Interface.

*PCI Express 2.0 standard with PCIE X1 interface will compatible with PCIE 3.0/4.0/2.0/1.1 standard.

*Compatible with PCIE X1,X2,X4,X8,X16 slot.

Specification

Bus Interface: PCI-E X1 (compatible with X4, X8, X16 slot)

Interface type: PCIE to 4-port USB 3.0

Product size: 120mm (bracket length) *67mm*57mm

Support system: DOS, Linux, Windows XP/7/8/10

– This is a 3.5 inch hard disk rack for SSD, hard drive storage.

– The 5-layer design and large capacity make it perfect for most 3.5 inch hard disks.

– The hollow design on both sides of the the cage ensures fast heat dissipation of the hard disks in all directions inside the HDD storage cage. 

– Made of quality metal material, this hard drive cage is stable and durable.

– Each layer of the bracket is equipped with four screws to fix the hard disk, thus  preventing the hard disk from falling. 

This hard disk storage bracket is a great solution for organizing your hard disks. It’s properly layered and fixed, safe and worry-free.

Specifications:
Material: Metal
Color: Black
Size: About 145*115*140 mm / 5.7*4.5*5.5 inch(L*W*H)
Layers: 5

Package Included:
1 * Hard Drive Bracket
1 bag of Screws

– 3.5 mm durable and stable high quality acrylic transparent bracket for organizing hard disk drives.

– 3.5-inch HDD bracket allows up to 10 hard disk drives to be stored and fixed in it.

– Each layer is equipped with four screws to fix the hard disk to prevent the hard disk from falling. 

– This 10-layer HDD bracket also has 3 cooling fan positions reserved. With three 8cm cooling fans installed, your hard disks will have better heat dissipation.

– There is a handle at the top of each panel, so you can move the HDD bracket with ease. The easy installation and portable design is ideal for DIY lover.

Specification:

Thickness: 3.5mm

Bracket Layers: 10 layers
Material: transparent acrylic 

Suitable for 3.5-inch hard disks

Supporting fan: 80mm fan, and the distance between fan holes is 72mm.

Package Includes:

1 x HDD Storage Bracket ( two panels and 45 screws without hard drives)

3 x Fans

3 x Iron Gratings for Fans

– This 7 pin SATA Data Extension Cable enables you to extend the reach between internal SATA drive connections by up to 1 meter (3ft).

– The extension simplifies drive installation by overcoming typical connection limitations.

– Constructed of only high quality materials and expertly designed for reliability and peak performance.

– It reduces the risk of damage to the drive or motherboard SATA connectors by eliminating the need to strain or stretch the cable in order to make the necessary connection.

SATA Extension Solution for Neat & Tidy Cable Management

* Offers 1 meter (3ft) in length for greater flexibility

* Compliant with Serial ATA III Specifications

* Supports data transfer rates up to 6 Gbps

* Specially designed to improve system airflow and route ability

* Eliminates the need to bend or strain the cable to account for a lack of space

– This 8 Pin PCIe power extension cable is used to lengthen the connection between host power connector and the PCIe port on a video card.

– Designed with PVC flexible jacket, 18 AWG oxygen free copper and bare copper braided shielding prolongs the life span of this cable.

– The clip and latch design on the connector can prevent accidental disconnections and ensure a safer power supply condition.

– This flexible PVC sleeved power supply cable not only looks attractive in an open computer case but also reduces the stress on your GPU port.

– The female end can connect to the power cable of the power supply and the male end can plug into the PCIe port on a video card. This PCIe power extension cable is compatible with popular video card models.

PSU Extension Solution for Neat & Tidy Cable Management

This 8-Pin PCIe Power Extension Cable provides a convenient solution for extending the connection from a power supply with a 8-Pin PCIe cable to a video graphics card.

* Sleeved cables are easy to dress in a computer case

* Attractive addition to a chassis with a viewing window

* Sleek black color coordinates with other components

* Latched plug connects securely to your GPU